Vishay G4-DT, Техническое руководство, Страница: 58 / 174

Technical Manual
4-18
Range/Alternatives Explanation and
<default value> result of alternatives.
1:HSWF Update Rate
25 Hz
50 Hz
100 Hz
200 Hz
400 Hz
800 Hz
800 Hz ++
<800 Hz> Defines the update rate for the measuring channel belonging to
Function Block 1 if the force conversion module is of HS WF 2
type.
Note: this parameter is only shown if the force conversion
module belonging to this Function Block 1 is of HS WF2 type.
1:WFIN Update Rate
9.3 Hz
19 Hz
37 Hz
75 Hz
150 Hz
300 Hz
300 Hz ++
<300 Hz> Defines the update rate for the measuring channel belonging to
Function Block 1 if the force conversion module is of WF IN or
WF IN2 type.
Note: this parameter is only shown if the force conversion
module belonging to Function Block 1 is of WF IN or WF IN2
type.
1:Calibration Type
Known Force
Table
< Table > Defines the type of calibration to be performed. A new
calibration is initiated as a ‘Calibration type’ is selected and
Enter key pressed.
Known Force: Known Force calibration is normally
the most accurate calibration type. It is recommended to load
with at least 2/3 of the used range.
Table: Table calibration is used when calibrating with data from
transducer calibration data sheet or when entering recorded
values from a previous calibration into a replacement instrument.