manualshive.com logo in svg

Vishay G4-DT, Техническое руководство, Страница: 20 / 174

Поделиться
Скачать
Vishay G4-DT Скачать руководство пользователя страница 20

Technical Manual  

2-2 

Electrical installation  

The field wiring of the instrument shall be suitable to the environment  
(e.g. chemically) in the end-user application.  
Mains cables shall be separated and routed away from SELV or  
SELV-E field wiring.  

 

For DT and HE instruments UL Listed and KAM cord type flexible cables shall be used. 
The cable diameters must be selected in accordance with the strain relief specification.  
See Technical Data.  

Field wiring installation shall comply with any national regulations, hereunder National 
Electrical Code (NEC) for US and/or Canadian Electrical Code for Canada. 

•

  A switch or circuit-breaker shall be included in the building installation.  

•

  The switch shall be in close proximity to the equipment and  

within easy reach of the operator  

•

  The switch shall be marked as the disconnecting device for the equipment.  

•

  The equipment switch or circuit-breaker employed as disconnecting device shall 

comply with relevant requirements of IEC 60947-1 and IEC 60947-3.  

The power supply for the instruments can be  
an external DC source and an internal DC SUPPLY unit  
or external AC mains and an internal AC SUPPLY unit.  

For electrical installation with an internal DC SUPPLY unit, see page 2-5.  

For electrical installation with an internal AC SUPPLY unit, see page 2-6.  

 

 

 

 

 

 

 

 

 

 

 

WARNING

 

Make sure that that the power to the instrument is turned off before:  

-  any modules are removed from or inserted in the instrument. 

-  any connections are connected to or disconnected from the instrument. 

 

All modules should be regarded as ESD sensitive. Make sure that an ESD safe 
environment is maintained when inserting modules, removing modules and when 
handling modules separately from the instrument. Modules must be kept in 
metallized ESD bag when not mounted in the instrument.

 

Содержание G4-DT















































































































































































Отзывы:

Нет отзывов