Virginia Controls, LLC
MH-3000 User Manual, 1_03C10-VC
Page 51
6.1.1.1
Banner Screen
A "Banner” screen
showing the program information is available. This is accessed by
pressing Esc from the Run Mode. A sample banner screen is shown here.
VaControls011207
12345.1.DS3CA04.
The "Banner” screen shows "VaControls" on the t
op line, followed by a code showing the
date code for the program in the format MMDDYY (in the example above this is “011207”
for January 12th, 2007). The code on the bottom line shows the Virginia Controls Job
Number (in the example above this is “12345”
), the program revision number (in the
example above this is “1”), and the code for the base program (In the example above this is
“DS3CA04”). Older programs may have a different format, such as having the date on the
bottom line, and the base program code on the top line.
The controller displays the "Car Status" screen when the "Banner" screen is exited.
To “Go to Setup Menu”, (see below)
From Setup Mode
To Setup Mode
To “Show Car Status”,
(see above)
VA CONTROLS
(BANNER SCREEN)
Press ENTER to
SHOW CAR STATUS
Press ENTER to
SHOW INT MEMORY
Press ENTER to
SHOW I/O STATUS
0400 00 00 00 00
0404 00 00 00 00
Virginia Controls
MAIN SETUP MENU
(BLANK SCREEN)
RUN MODE SCREENS
AUTO PwrOk
2 UP CLSD
INPUTS 0000 0000
Board1 0000 0000
= Press “Prv”
= Press “Nxt”
= Press “Ent”
= Press “Esc”
The normal sequence is to press “Nxt”
to select the desired menu item.
Press “Ent” to use the menu item.
Press “Esc” when you are finished.
Press ENTER to
GO TO SETUP MENU
Warning: PROGRAM
& CAR WILL STOP!
Press ENTER to
SHOW FAULT LOG
01 09:40 FLTCODE
2 0000 0000 0000
Note: LCD will display
Car Status Screen or
Blank Screen on start
up, depending on the
setting of S2 switch 1.
Note: Press “.” to show
the current time.
