Vimar 01527 Скачать руководство пользователя | Manualshive

Страница: 5 / 92

background image

5

1.5 Safety instructions

Warning

Electric voltage! Risk of death and fire due to electric voltage of 230 V.
Dangerous currents flow through the body when coming into direct or indirect contact with live components. This can result in electric shock,
burns or even death.
- Work on the 230 V supply system may only be performed by authorised and qualified electricians!
- Disconnect the mains power supply before installation / disassembly.
- Never use the device with damaged connecting cables.
- Do not open covers firmly bolted to the housing of the device.
- Use the device only in a technically faultless state.
- Do not make changes to or perform repairs on the device, on its components or its accessories.
- Keep the device away from water and wet surroundings.

Attention - damage to property

Risk of damaging the device due to external factors! Moisture and contamination can damage the device.
- Protect the device against humidity, dirt and damage during transport, storage and operation.

2. Information on protection of the environment

All packaging materials and devices bear the markings and test seals for proper disposal.
The products meet the legal requirements, in particular the laws governing electronic and electrical devices and the REACH ordinance (EU Directive 2002/96/EG WEEE
and 2002/95/EG RoHS), (EU-REACH Directive and Law for the Execution of the Directive (EG) No.1907/2006).

The device contains valuable raw materials which can be recycled. Used electric and electronic devices must not be disposed of with domestic
waste.
- Always dispose of the packaging material and electric devices and their components via the authorized collecting depots and disposal com-

panies.

Safety - Information on protection of the environment

«
...
3
4
5
6
7
...
»

Содержание 01527





























































































Отзывы:

Нет отзывов

Похожие инструкции для 01527

Бренд: ICI Страницы: 9

Бренд: Paradox Страницы: 2

Бренд: Paradox Страницы: 2

Digiplex EVO DGP2-640

Бренд: Paradox Страницы: 24

Бренд: DSE Страницы: 20

Бренд: Zavio Страницы: 16

Бренд: Eneo Страницы: 90

Бренд: RAM Страницы: 38

Бренд: ACR Electronics Страницы: 10

Interlogix RF440I4

Бренд: United Technologies Страницы: 4

Бренд: United Security Products Страницы: 16

Бренд: Elmes Electronic Страницы: 2

Leak Alert WiFi

Бренд: Zircon Страницы: 21

Бренд: Pentatech Страницы: 17

Бренд: Reedy Страницы: 4

Бренд: Moog Videolarm Страницы: 2

Бренд: Comelit Страницы: 12

Бренд: Wisenet Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды