4
1. Safety
The device has been constructed according to the latest valid regulations governing technology and is operationally reliable. It has been tested and left the factory in a
technically safe and reliable state.
However, residual hazards remain. Read and adhere to the safety instructions to prevent such hazards.
VIMAR accepts no liability for failure to observe the safety instructions.
1.1 Used symbols
The following symbols point to particular dangers involved in the use of the device and provide practical instructions.
Warning
This symbol in connection with the signal word "Warning" indicates a dangerous situation which could lead to immediate death or to serious
injury.
Attention - damage to property
This symbol indicates a possibly damaging situation for the product. Non-observance can lead to damage or destruction of the product.
This symbol indicates information on the protection of the environment.
The following symbols are used in the manual to draw attention to special dangers:
This symbol indicates a dangerous situation due to electric current.
If such a sign is ignored, it can lead to serious injuries or even death.
1.2 Intended use
The presence/movement detector is designed only for interior areas of buildings. The devices serve for switching and regulating lighting systems and/or HKL (HVAC)
systems in dependence of brightness and/or movement.
The devices are not suitable for use as an intrusion or attack alarm since they lack the required security against sabotage in accordance with the German VdS
(Authority on Safety and Security) regulations.
The device is intended for the following:
- operation according to the listed technical data,
- installation in dry interior rooms,
- installation on the ceiling and can be concealed "Flush-mounted" (e.g. in suspended ceilings), or "Surface-mounted" (optional housing, article no. 6131/x09).
- use with the connecting options available on the device.
The intended use also includes adherence to all specifications in this manual.
1.3 Improper use
Each use not listed in chapter 2.2 is deemed improper use and can lead to personal injury and damage to property.
VIMAR is not liable for damages caused by use deemed contrary to the intended use of the device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
- unauthorized structural changes,
- repairs,
- use outdoors or in bathroom areas,
- use with an additional bus coupler,
- installation in the BS and VDE flush-mounted box.
1.4 Target group / qualification of personnel
Installation, commissioning and maintenance of the product must only be carried out by trained and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions provided.
The electrical installers must adhere to the valid national regulations in their country governing the installation, functional test, repair and maintenance of electrical
products.
The electrical installers must be familiar with and correctly apply the "Five safety regulations" (DIN VDE 0105, EN 50110):
1. Disconnect the power;
2. Secure against being reconnected;
3. Ensure there is no voltage;
4. Connect to earth and short-circuit;
5. Cover or barricade adjacent live parts.
Safety
