manualshive.com logo in svg

Vimar 01527, Руководство по установке

Поделиться
Скачать
Vimar 01527 Скачать руководство пользователя страница 20

   20

7. Updating options

Always use the latest firmware. The latest download files for the firmware update are contained in the electronic catalogue. They are also available via the KNX online shop. 
A firmware update is carried by means of an ETS application via the bus.

Note:

Please adhere to the current information about the download files. These also contain instructions for the installation of the firmware update.

8. Maintenance

The device is maintenance-free. In case of damage (e.g., during transport or storage), do not perform repairs. Once the device is opened, the warranty is void!
Access to the device must be guaranteed for operation, testing, inspection, maintenance and repairs (according to DIN VDE 0100-520).

8.1 Cleaning

Dirty devices can be cleaned with a dry cloth. If this is not sufficient, a cloth slightly moistened with a soap solution can be used. Caustic/aggressive or scouring 
cleaning agents or solvents must not be used.

Updating options - Maintenance

Содержание 01527





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды