73
9.9 Communication objects — Presence detector — Master
9.9.1 Px: switchover of manual operation
Number
Name
Object function
Data type
12 | 30 | 48 | 64
Px: Switchover of manual operation
Input
1.001 switch
This object is used to switch over from automatic mode to manual mode (default: 0 = automatic, 1 = manual).
9.9.2 Px: external push-button
Number
Name
Object function
Data type
13 | 31 | 49 | 65
Px: external push-button
Input
1.001 switch
The detector switches on if a 1 (default) is received via this object. The detector switches off if a 0 (default) is received via this object.
-
Manual mode inactive
: Movement detector is back on automatic.
-
Manual mode active
: The movement detector remains switched off until the detector is switched on manually or manual mode is deactivated.
Note:
The movement detector is inactive in manual mode and to switch it on or off is only possible only via the external push-button. In automatic mode the switch-on
via the external push-button simulates a movement.
9.9.3 Px: Activate test mode
Number
Name
Object function
Data type
14 | 32 | 50 | 66
Px: Activate test mode
Input
1.001 switch
The test mode is activated via this object (1 = activated, 0 = deactivated). It is automatically deactivated after 10 minutes.
9.9.4 Px: Brightness reduced according to switch-off delay
Number
Name
Object function
Data type
16 | 34 | 52 | 68
Px: Brightness reduced according to switch-off delay
Input
7.005 time (s)
If no movement is detected after the switch-off delay has expired, the function enters the programmed switch-off delay and then switches off. The switch-off
delay can be reprogrammed at all times via this object from a different control element without the aid of ETS. If this value is not to be overwritten during each
download, the parameter "Overwrite setting during download" is to be programmed accordingly.
Description of application and parameters
Communication objects - Presence detector - Master
