manualshive.com logo in svg

Vimar 01527, Руководство по установке

Поделиться
Скачать
Vimar 01527 Скачать руководство пользователя страница 6

   6

3. Product description

3.1 Device overview

24V

1

2

4

3

3

4

A

C

B

2

1

Fig. 1: Product overview

A  Programming button
B  Sensor for brightness detection
C  Programming LED

1, 2, 3, 4  Individual sectors with switch-off function (via parameter setting).
 

For numbering see the rear of the device

This device is a presence or movement detector which is designed only for interior areas of buildings. The devices serve for switching and regulating lighting systems 
and/or HKL (HVAC) systems in dependence of brightness and/or movement. It makes possible the specific deactivation and activation of light rows in dependence 
of the brightness of the room. Also dimming/regulating the brightness to a defined value in a designated detection range with the corresponding device is possible.
The integrated bus coupler makes possible the connection of a KNX bus line.
The device can be mounted either in the ceiling via hollow-wall mounting or on the ceiling via the optionally available surface-mounted housing (article 01529.1.S 
and 01527.S). The mounting instructions are enclosed with the surface-mounted housing. The overall function of the device also depends on the mounting height.

Note 

The device does not fit in the BS and VDE flush-mounted box.
Recommendation:
• HaloX-O flush-mounted box from Kaiser (article no. 1290-40) with corresponding cover (article no. 1290-47 or article no. 1290-85 for exposed concrete)
• IBTronic H120-68 from Spelsberg (article no. 97600501)

The detection range can additionally be adapted via individual sectors with switch-off function (via parameter setting).

Note 

The unit contains highly sensitive sensors and lens systems.
- Do not cover or mask lens segments since this will interfere with the function of the device.
- Do not clean the device and the lens system with abrasive or aggressive cleaning agents.

3.2 Overview of types

Article no.

Detection range

Usage

Mounting height

01527

Circular

(details under 'Technical Data')

For detection range of up to 8 m individual rooms (e.g. office, living room, 
etc.).
Wherever increased functionality is required.

2,5 m, 3 m and 4 m

01529.1

Circular

(details under 'Technical Data')

For detection range of up to 12 m large rooms (e.g. large-scale office, class-
rooms, etc.). Wherever functionality is not greatly in demand.

2,5 m, 3 m and 4 m

Product description

Содержание 01527





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды