50
9.7 "Brightness detection" application
9.7.1 General parameters - Sending of brightness every (hh:mm:ss)
Options:
0.00.05 .. 0.00.30 .. 18.12.15
- Here it is specified how often the brightness is sent on the bus.
9.7.2 General parameters - Use of object for LED
Options:
No
Yes
-
No
: There is no separate LED object.
-
Yes
: There is a separate 1-bit LED object (input) for the option of switching on the LED via an On telegram and to switch it off with an Off telegram.
Note:
Only the LED has been switched. This does NOT place the device into programming mode.
9.7.3 General parameters - Correction of internal brightness
Options:
No
with daylight adjustment
with daylight and artificial light adjustment (1 output)
with daylight and artificial light adjustment (2 outputs)
-
No
: It is not necessary to calibrate the internal brightness sensor.
-
with daylight adjustment
: This adjustment is used mainly for the detector application.
-
with daylight and artificial light adjustment (1 output)
: This adjustment is used for the constant light switch and constant light controller and only for one light
row. It starts with the daylight adjustment, and only if the control then does not function optimally can the artificial light adjustment be carried out.
-
with daylight and artificial light adjustment (2 outputs)
: This adjustment is used for the constant light switch and constant light controller and for two light
rows. It starts with the daylight adjustment, and only if the control then does not function optimally can the artificial light adjustment be carried out.
Note:
How the adjustment is carried out is explained in chapter 7.2.6 " Instructions on the calibration of the internal light controller".
9.7.4 General parameters - Fade in extended parameters
Options:
No
Yes
-
No
: Only the most important parameters for setting the detector are displayed.
-
Yes
: All parameters are displayed, also those that are not required in most cases.
Examples:
› Extended parameters
9.7.5 Extended parameters - Use of internal brightness
Options:
Yes
No
-
Yes
: The internal brightness sensor is used as encoder for the different detector applications.
-
No
: The internal brightness sensor is not used. The brightness values must then be sent from the external brightness sensors.
9.7.6 Extended parameters - Number of external brightness measurement objects
Options:
0
1
2
-
0
: There are no separate 2-byte external brightness 1 and 2 (input) objects to link the external brightness sensors with the presence detector.
-
1
: There is a separate external brightness 1 (input) object with which the internal brightness sensor is not used. The brightness values must then be sent from
the external brightness sensors.
-
2
: There is a separate external brightness 2 (input) object with which the internal brightness sensor is not used. The brightness values must then be sent
from the external brightness sensors.
Description of application and parameters
"Brightness detection" application
