Vertical Comdial DX-80, Техническое руководство

Страница: 74 / 322

P
ROGRAMMING
S
YSTEM
F
EATURES
> P
ROGRAMMING
S
PEED
D
IAL
N
UMBERS
DX-80 Programming Manual
- 74 -
There are 200 speed dial bins allocated for system-wide use (locations 500-699). Extensions may also store up to
50 personal speed numbers in memory.
You can program the DX-80 system to allow system speed dial numbers to override toll restriction settings (both
CO line and extension COS). For example, suppose your customer has a branch office out of state where they want
to allow the corporate extension users to call, while still prohibiting all other toll calls. In this case, you can set up
a system speed dial to allow calls to the branch office.
Note : It must be a system speed dial, as the system checks
the toll restrictions for individual speed dial numbers and abides by them. System speed dial numbers override toll
restrictions as long as you have System Speed Toll Check enabled. See Section 6.21, Enabling/Disabling System
Speed Toll Check for more details.
The default length of both individual and system speed dial numbers is three digits. The default range for system
speed dials is directory numbers 500 to 699. The default range for individual speed dials is directory numbers 470
to 489. You can change any of these default settings by customizing the numbering plan. For more information,
see Section 4.20.2.3,
Numbering Plan 3 .
The following conditions apply to assigning system speed dial numbers.
• The DX-80 system has 1000 speed dial number memory locations that are dynamically allocated to the
system use (extensions individually via extension speed dial locations, or all extensions via system speed dial
locations).
• You can program system speed dial bins, using Attendant Administration on a DET.
• You can chain speed bins.
• You can store pauses and flashes within the speed dial number. Chaining, pauses, and flashes each occupy
one character position.
• If you access an empty bin the system displays the following.
SPEED NO. EMPTY
Note : You can program individual speed dial numbers at the individual extension, or across several extensions
using PC-DBA. If you use the DET to set up your speed dials, you will have to program the speed dials at each
extension; you cannot program individual speed dial numbers globally using the DET.
4.8.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The system displays the DB Item Select screen.
3. First, program SPD No. Assignment. Enter 04-08 , then press save .
4. Press show , which advances you to the Assignment for Individual Speed Dial numbers screen.
5. Press show to change an extension’s speed numbers assignment. Then enter the extension number you want
to set.
6. Press show , this advances you to the Increase screen for this extension.
7. Press chg to increase the assigned speed dial numbers for this extension. The range of allowable speed dials
is 0 to 50. The default for extensions 101-140 is 20. The default for all others is 0.
Or...