Vertical Comdial DX-80, Техническое руководство

Страница: 122 / 322

P
ROGRAMMING
CO L
INES
> S
ETTING
P
RIVACY AND
P
RIVACY
R
ELEASE
DX-80 Programming Manual
- 122 -
4. Use Page Up or Page Down to select CO Lines 1-8 or 9-16.
5. Highlight the Call Abandon field for the CO line you want to program. Press Enter to turn call abandon on
(yes) or off (no). The default is on.
6. In the same manner, set the call abandon for other CO lines as needed.
7. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
8. The system prompts “Save Current Setting?” Press Y to save your changes.
9. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
10. Press Esc to return to the Database Programming menu.
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
5.8 Setting Privacy and Privacy Release
The DX-80 system is shipped with all intercom and CO line calls set for privacy, which means these calls may not
be monitored or interrupted by other extensions. If users’ programmed class of service allows them to have the
Privacy Release and Voice Over Busy features, they may use those features to override the CO line privacy set-
tings.
If Privacy is set on, conversations are private from interruption. If Privacy Release is set on, conversations on that
CO line may be interrupted. The following conditions apply to the privacy mode:
• If Privacy Release is set to Y for any CO line, that CO line conversation can be entered into by another
extension.
• The Monitor feature can be used to listen in on existing conversations. For details on setting the monitoring
privileges for individual extensions, see Section 10.9, Setting up Monitoring Privileges .
• The Intrusion feature can be used to barge in on existing conversations. For details on setting the intrusion
privileges for individual extensions, see Section 10.10, Setting up Intrusion .