Vertical Comdial DX-80, Техническое руководство

Страница: 171 / 322

- 171 -
DX-80 Programming Manual
P
ROGRAMMING
C
ALL
H
ANDLING
> S
ETTING
C
ONFERENCE
T
ALK
T
IME
I
NTERVALS
6.17 Setting Conference Talk Time Intervals and Conference Tones
Conference is used to join telephone connections together. Meet Me Conference simplifies the setup process by
assigning designated system resources as conference destinations. The result is eight separate conference locations
that are joined by dialing the location number. Callers can easily be transferred to these locations; extension users
simply dial the location number. Outside parties can join the conference via the automated attendant simply by
dialing the location number at the auto attendant greeting.
A programmable conference tone may be enabled or disabled so that entry into a conference is indicated with an
alert tone, or without an alert tone.
When call abandon is set to N for any CO line, you must set the Meet Me Conference Talk Time to some value
other than 0. This is the only setting that will allow the CO line to be disconnected if call abandon is set to no.
Other features whose programming may be affected by conference talk times and conference tones include the fol-
lowing.
• CO Line – Call Abandon
• Call Handling – CO Line Conference
• Call Handling – Talk Abandon Time
• System Application – Meet Me Conference Directory Number
6.17.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The DB Item Select screen displays.
3. First, program the Meet Me Conference Time. Enter 03-37 . Then press save .
4. Press chg to specify how long you want the system to allow meet me conferences to last. The valid range is
from 0 to 120 minutes, in 10 minute increments. The default is 0 (unlimited).
5. Next, Program the Conference Tone Operation. Press the Volume button (up or down) to return to the DB
Item Select screen.
6. Enter 03-23 , then press save .
7. Press chg to specify if you want the system to play conference tones. Valid choices are yes or no. The
default is yes.
8. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.