Vertical Comdial DX-80, Техническое руководство

Страница: 135 / 322

- 135 -
DX-80 Programming Manual
P
ROGRAMMING
CO L
INES
> S
ETTING
U
P THE
A
LTERNATE
CO L
INE
G
ROUP
5.14.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The system displays the DB Item Select screen.
3. Enter 07-01-xx-03 to program Alternate Routing for CO Line Group “xx.”
4. Press save . This advances you to Alternate CO Group.
5. Press show . The display shows ALTER. CO GP :_.
6. Enter the alternate route to program (1 for first alternate, or 2 for second alternate) for this CO line group.
7. Press show . The display shows CO GP NUMBER : x, where “x” is the current programming. “0” means
no alternate route.
8. To change this alternate route selection, press chg .
9. Enter the CO line group that you want to use as the (1st or 2nd) alternate route for this CO line group. Press
save .
10. Press next to advance to the Delete Digits for this alternate route selection.
11. If it is necessary to delete digits from the dialed digits when calls are routed to this alternate, put in the num-
ber of digits to delete here.
12. Press chg . Enter the quantity of digits to delete from the beginning of the number dialed ( 0-9 ).
13. Press save .
14. Press next to advance to the Inserted Digits for this Alternate Route selection.
15. If it is necessary to insert digits before sending the dialed digits when calls are routed to this alternate, enter
the actual digits required here.
16. Press chg . Enter the required digits (up to 16 digits). Press save .
17. Press next . The display shows “ALTER. CO GP :_.” You can now program the next alternate route for this
CO line group (if required).
18. Enter the alternate route to program (1 for first alternate, or 2 for second alternate) for this CO line group.
19. Press show and continue programming in the same manner.
20. When you are finished programming alternate CO line routes, press the Hold button to return to the previ-
ous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.