Vertical Comdial DX-80, Техническое руководство

Страница: 173 / 322

- 173 -
DX-80 Programming Manual
P
ROGRAMMING
C
ALL
H
ANDLING
> S
ETTING
U
P
C
AMP
O
N
I
NTERVAL
10. Highlight Conference Tone and press Enter to specify if you want the system to play conference tones.
Valid choices are yes or no. The default is yes.
11. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
12. The system prompts “Save Current Setting?” Press Y to save your changes.
13. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
14. Press Esc to return to the Database Programming menu.
15. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
6.18 Setting Up Camp On Interval
The DX-80 allows you to specify how long before the system waits before sounding a beep to extension users,
alerting them that another call is camped on to their extension.
6.18.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The DB Item Select screen displays.
3. Enter 03-18 . Then press save .
4. Press chg to specify how long you want the system to wait before sounding the camp on beep to the exten-
sion user at a busy extension. The valid range is from 0 to 60 seconds, in 10 second increments. The default
is 20 seconds.
5. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.