Vertical Comdial DX-80, Техническое руководство

Страница: 154 / 322

P
ROGRAMMING
C
ALL
H
ANDLING
> E
STABLISHING
W
ARNING
T
IME FOR
L
IMITED
C
ALL
L
ENGTHS
DX-80 Programming
- 154 -
5. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
6. The system prompts “Save Current Setting?” Press Y to save your changes.
7. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
8. Press Esc to return to the Database Programming menu.
9. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
6.9 Establishing Warning Time for Limited Call Lengths
You can limit an extension to calls that fall within a specific programmed time. You can set the DX-80 to warn an
extension that the time has expired, thereby advising the user to disconnect. In this mode, the system plays a
warning tone repeatedly once the timer has expired. You could use this feature, for example, in a lobby or retail
environment where lengthy calls are discouraged.
You can also program the call limiter with greater call control. In this mode, the system automatically disconnects
the call moments after playing the warning tone. You can set the CO line call limiter for extensions on a per-
extension basis and according to call type (outgoing or incoming or both).
Note : You are only programming the
warning time here. To control when the system disconnects calls that have exceeded the limit you set, you have to
program the individual extensions.
For further details about setting call control for individual extensions, see
Section 10.11, Setting up Warning Tones, Incoming Call Drops, Outgoing Call Drops .
Extension users can make additional calls after the system plays the warning tones or drops the call, therefore This
feature is NOT RECOMMENDED as a toll saver option. Use this feature only for specific applications.
Note :
For details on programming toll restrictions, see Section 7, Programming Toll Restrictions.
6.9.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The system displays the DB Item Select screen.
3. Enter 03-09-01 for Warning Time Outgoing. Press chg to select how long after the outgoing call begins that
you want the system to sound the warning time to the extension user. Valid options include 1 - 30 minutes.
The default is 5 minutes.
4. Enter 03-09-02 for Warning Time Incoming. Press chg to select how long after the incoming call begins
that you want the system to sound the warning time to the extension user. Valid options include 1 - 30 min-
utes. The default is 5 minutes.
5. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.