Vertical Comdial DX-80, Техническое руководство

Страница: 264 / 322

P
ROGRAMMING
E
XTENSIONS
> S
ETTING UP
W
ARNING
T
ONES
, I
NCOMING
C
ALL
D
ROPS
, O
UTGOING
C
ALL
D
ROPS
DX-80
- 264 -
8. In the same manner, program the intrusion privileges for other extensions as needed.
9. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
10. The system prompts “Save Current Setting?” Press Y to save your changes.
11. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
12. Press Esc to return to the Database Programming menu.
13. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
10.11 Setting up Warning Tones, Incoming Call Drops, Outgoing
Call Drops
You can limit an extension to calls that fall within a specific programmed time. You could use this feature, for
example, in a lobby or retail environment where lengthy calls are discouraged.
You can set the DX-80 to either:
• warn an extension that the time has expired, thereby advising the extension user to disconnect. In this mode,
the system plays a warning tone repeatedly once the timer has expired.
• automatically disconnect the call moments after playing the warning tone. You can choose between dropping
incoming calls, dropping outgoing calls, or both.
You program the time allowed for calls while programming call handling. For details on how to set or adjust the
time period, see Section 6.24,
Specifying Call Duration . For details on how to set or adjust the warning time, see
Section 6.9, Establishing Warning Time for Limited Call Lengths .
Extension users can make additional calls after the system plays the warning tones or drops the call, therefore This
feature is NOT RECOMMENDED as a toll saver option. Use this feature only for specific applications.
Note :
For details on setting up toll restrictions, see Section 7, Programming Toll Restrictions.
10.11.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The system displays the DB Item Select screen.
3. Enter 01-101~156-08 for Warning Tone (where 101~156 is the extension you want to program) and press
chg to select whether or not you want the system to play warning tones on this extension when the warning
time limit has expired. Valid options are Y or N . The default is N. Note : For details on the warning time
limit, see Section 6.9, Establishing Warning Time for Limited Call Lengths.
4. Press next for the Drop Call Out field, and press chg to specify if you want the system to drop outgoing calls
after the warning time has expired. Valid options are Y or N . The default is N.
5. Press next for the Drop Call In field, and press chg to specify if you want the system to drop outgoing calls
after the warning time has expired. Valid options are Y or N . The default is N.
6. Press chg until the value you want to use (Y/N) displays.
7. Press the Hold button to return to the previous menu level,