Vertical Comdial DX-80, Техническое руководство

Страница: 235 / 322

- 235 -
DX-80 Programming Manual
P
ROGRAMMING
V
OICE
M
AIL
> P
ROGRAMMING
T
HIRD
P
ARTY
VM, A
NALOG
P
ORTS
9.1.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The system displays the DB Item Select screen.
3. First, enter 01-101~156-21 to program the extension port type, where 101~156 is the analog port number
you want to use for the voice mail. Press save .
4. Press chg until the system displays port type VM for this extension.
5. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program the UCD group members.
1. Enter 06-01-01~24-03-01 , where 01~24 is the group number.
2. Press save . This advances you to Member #1 of the UCD group you specified.
3. Press chg . Enter the extension directory of the analog port to program into this Member.
4. Press save , then press next .
5. In the same manner, continue programming all voice mail ports as member of this UCD group.
6. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program the voice mail hunt group.
1. Enter 06-02-1~3-01 , where 1~3 is the Tenant Group (usually 1).
2. Press save . This advances you to Voice Mail Table for Tenant 1 – Hunt Group.
3. Press chg until the UCD group you want to use as the VM hunt group displays. The VM hunt group is the
UCD group where you have programmed all of the VM type analog ports as members.
4. Press next to continue programming the various call handling digits (prefix/suffix).
5. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program the VM Table – Prefix Table – ICM/VM.
1. Enter 06-02-1~3-02-01 , where 1~3 = tenant group.
2. Press save , then press chg . Enter the prefix numbers you want the system to use when identifying a call as
originating at the mailbox owner’s phone.
3. Press save .
4. Press next to continue programming the various call handling digits (prefix/suffix).