Vertical Comdial DX-80, Техническое руководство

Страница: 144 / 322

P
ROGRAMMING
C
ALL
H
ANDLING
> S
PECIFYING
CO F
LASH
T
IME
DX-80 Programming Manual
- 144 -
13. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
14. The system prompts “Save Current Setting?” Press Y to save your changes.
15. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
16. Press Esc to return to the Database Programming menu.
17. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
6.3 Specifying CO Flash Time
The CO flash time determines what flash timing the DX-80 presents to the telephone company central office when
the user issues a hook-flash command while connected to a CO line. This feature is a requirement when the DX-80
is installed “behind” a Centrex or PBX system. In these two cases, program the flash feature code as a Flexible
Feature Button for easy access.
If call waiting service is provided, the extension user can use the flash feature to answer a second incoming call
while connected to another outside party.
The following conditions apply to setting the CO flash time.
• The flash time is programmable from 100ms to 1500ms in increments of 100ms (1/10th of a second).
• When extension users enter the flash code at a DET, the phone displays CO Flash temporarily.
• Single line extension users must generate a hook-flash and then dial # 3 to generate a hook-flash on a CO line.
• You can store the flash code in any speed dial location.
• You can store the flash code in the last number redial buffer. When you activate redial, a digital speakerphone
display shows a / to indicate the flash code.
Other features whose programming may be affected by the CO flash time include the following.
• Speed Dial (System and Station)
• Memo Pad
• Last Number Redial
• Automatic Redial
6.3.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The system displays the DB Item Select screen.
3. Enter 03-02 , then press save . This advances you to CO FLASH programming.
4. Press chg until the CO line hook-flash timing you want to use displays. Valid options are between .1 and 3.0
seconds. The default is .8 seconds.
5. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,