Vertical Comdial DX-80, Техническое руководство

Страница: 23 / 322

- 23 -
DX-80 Programming Manual
O
VERVIEW
> P
ROGRAMMING A
N
EW
S
YSTEM
8. Program the feature buttons on the individual DET phones and DSS consoles.
The DX-80 provides some shortcuts to help you perform these tasks efficiently. For example, when you are setting
up the individual extensions, you can first set up a “base” extension that is typical of how you will set up the
majority of extensions. After you have set up this base extension, you can copy its programming to all of the other
extensions in the system. Then, you can modify the few specific extensions that require different programming.
The DX-80 provides a similar shortcut for setting up CO lines with a CO Line Copy command. For more details
on helpful shortcuts provided with your system, see Section 3.1,
Shortcuts to Help You Work Faster .
1.3.1 SETTING UP THE SYSTEM FEATURES
The system features allow you to control system administration and to assign system resources. Perform the fol-
lowing steps.
1. Establish the database administrator password.
2. Assign the attendant extension for each tenant group.
3. Assign the system reminder for each tenant group.
4. Set the user passwords for extensions 101, 102, and 108.
5. Specify the user names for extensions 101 and 108.
6. Name each CO line (1-8).
7. Set up the pre-programmed incoming and outbound messages.
8. Program speed dial numbers.
9. Set the number of items in the Caller ID table.
10. Establish the music source for the each tenant group.
11. Assign the external pager ID to a tenant group. Enable/disable page group 1 and 8.
12. Program ancillary devices (loud bell, external page, music on hold source).
13. Allocate the DSS.
14. Set up the optional internal modem.
15. Select the PC-DBA transmit rate.
16. Select the SMDR transmit rate.
17. Set up the ring scheme.
18. Specify the letter type.
19. Set up the system time, date, and hour mode.
20. Set up the numbering plan you want to use. The DX-80 has a built-in numbering plan that you can use as is
or modify if necessary.
Details on how to perform these tasks are included in Section 4, Programming System Features . The DX-80 pro-
vides programmable features that allow you to establish these various settings.
1.3.2 SETTING UP CO LINES
Once you have set up the extensions, you can begin programming the CO lines into the system. Perform the fol-
lowing tasks for each CO line.
1. Assign the CO line to a tenant group.
2. Assign the CO line to a pickup group.