Vertical Comdial DX-80, Техническое руководство

Страница: 258 / 322

P
ROGRAMMING
E
XTENSIONS
> A
SSIGNING
E
XTENSIONS TO A
C
LASS OF
S
ERVICE
DX-80 Programming Manual
- 258 -
9. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
10. Press Esc to return to the Database Programming menu.
When you have finished all programming changes, perform a Send operation to copy your new database to the DX-
80 switch system memory. For more details, see Section 2.1.4.4,
F4 – Send .
10.8 Assigning Extensions to a Class of Service
The DX-80 provides sophisticated monitoring of outbound digits dialed by extension users. You can assign COSs
for a broad range of call control. For example, if a digit or range of digits dialed on a CO line is inconsistent with
the dialing extension’s or CO line’s class of service, the system denies the call. You can apply this calling COS cri-
teria to local calls, long distance calls, and specific numbers that are considered allowed in areas where other
numbers may be restricted.
The following conditions apply to assigning class of service to extensions.
• Callers can override an extension’s class of service if you set up an account code password that instructs the
system to use a different class of service for the call. See Section 7.2, Account Code Length and Password .
• You can set a system speed dial to override toll restriction. For example, suppose your customer has a branch
office out of state where they want to allow the corporate extension users to call, while still prohibiting all
other toll calls. In this case, you can set up a system speed dial to allow calls to the branch office.
Note : It
must be a system speed dial, as the system checks the toll restrictions for individual speed dial numbers and
abides by them. System speed dial numbers override toll restrictions as long as you have System Speed Toll
Check enabled. For more details on speed dial numbers, see Section 4.8, Programming Speed Dial Numbers.
10.8.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The system displays the DB Item Select screen.
3. Enter 01-101~156-05 (where 101~156 is the extension) to program the daytime class of service for the
extension you specified.
4. Press chg until the COS you want to assign displays. Valid choices are 0 through 7. The default is class of
service 0.
5. Enter 01-101~156-06 (where 101~156 is the extension) to program the evening class of service for the
extension you specified.
6. Press chg until the COS you want to assign displays. Valid choices are 0 through 7. The default is class of
service 0.
7. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen.
8. Press the Volume button (up or down) to return to the DB Item Select screen.
9. Exit programming.