Vertical Comdial DX-80, Техническое руководство, Страница: 219 / 322

- 219 -
DX-80 Programming Manual
P
ROGRAMMING
T
OLL
R
ESTRICTIONS
> A
CCOUNT
C
ODE
L
ENGTH AND
P
ASSWORD
7.2 Account Code Length and Password
You can program an extension so that the user is forced to enter an account code (password) to make certain line
calls, or before making any line calls. You determine the account code length (from 2 to 8 digits) during pro-
gramming. This single setting determines the length of account codes for the entire system.
When the extension user dials a valid account code, the system monitors the call for toll restriction against the class
of service associated with the entered account code.
Once you have set up the account codes, you then have to program the individual extensions to restrict their calls.
For further details, see Section 10.4,
Assigning a Password to the Extension .
7.2.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The DB Item Select screen displays.
3. Enter 05-02 and press save .
4. Press show . The account code LENGTH field displays.
5. Press chg to enter the number of digits you want to use for account codes, then press save. Valid options are
2 - 8 digits. The default is 2.
6. Press next . The account code PASSWORD field displays.
7. Press show . Enter the account code number 001-600 you want to change/display.
8. Press show . The existing programming displays. (“NULL” = empty.)
9. Press chg.
10. Enter the new password and press save . Valid passwords are numbers from 0 to 9, containing as many dig-
its as you specified in the Length field. The default is no password. The new password is now in effect.
11. Press next . The Class of Service for this account code displays.
12. Press chg until the class you want to assign to this password displays.
13. Press next . The item DISABLED displays. This setting is used temporarily disable the use of a particular
account code without removing its programming. Press chg to select Y (disabled) or N (enabled).
14. Press next to continue programming other account codes. Or exit programming.