Vertical Comdial DX-80, Техническое руководство

Страница: 288 / 322

P
ROGRAMMING
F
EATURE
B
UTTONS
> P
ROGRAMMING A
R
ELEASE
K
EY
DX-80 Programming Manual
- 288 -
11.4 Programming a Release Key
DET speakerphone users may want a release key they can use to cancel or complete any current action. The
release key function can speed call processing by allowing the user to eliminate the use of the hook-switch, when
call processing is encumbered by this operation.
Extension users can use the release key to complete a call transfer (rather than going back on-hook). They can also
use it to force the telephone into an idle mode regardless of the condition of the hook-switch.
• You must program the release key onto an available feature button.
• When users press the release key the system disconnects the call in progress.
To set up a feature button for release key operation, perform the following steps.
1. While the telephone is idle press Feature # 3 .
2. Press the flexible feature button that you want to use as the release key.
3. Press chg .
4. Press ftr .
5. Enter the feature code Feature 5 2 . Then press save .
6. Exit the Flexible Feature Button programming mode.
11.5 Flexible Feature Button Inquiry
You may review the programming for flexible feature buttons at an idle DET. In order to review the programming,
you must dial the flexible button programming mode.
Buttons without feature programming will display AVAILABLE KEY.
11.5.1 LOOKING UP CODES USING THE DET
1. Press Feature # 3 . The display shows the following.
PRESS FTR KEY
2. Press the flexible feature button to view its programming. For example, press button 1 (lower left).
740
show chg
3. Press show . The name/designation of the feature/directory number displays.
CO LN :740
4. Continue checking other buttons for their programmed content, or lift/replace handset to exit the flexible
feature button inquiry mode.
11.6 Feature Key Reset
You can clear all the feature key custom settings and reset all buttons to the default settings. See Appendix B,
Button Labeling for the default feature key configuration.