Vertical Comdial DX-80, Техническое руководство

Страница: 184 / 322

P
ROGRAMMING
C
ALL
H
ANDLING
> P
ROGRAMMING
C
ALLER
ID C
ODES
& L
OCAL
C
ALLING
A
REAS
DX-80 Programming
- 184 -
6.25.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The DB Item Select screen displays.
3. First, program the CID codes. Enter 03-25 then press save to program the international prefix. Press show
to view the contents of this field. Press chg to enter in the code you want the system to dial (if any) when
dialing international calls. The range is from 0 to 9999. The default is NULL (none). Press save .
4. Enter 03-26 then press save to program the country code. Press show to view the contents of this field.
Press chg to enter the code you want the system to dial (if any) when dialing international calls, and press
Enter . The range is from 0 to 9999. The default is NULL (none). Press save .
5. Enter 03-27 then press save to program the long distance prefix. Press show to view the contents of this
field. Press chg to enter the code you want the system to dial (if any) when dialing long distance calls, and
press Enter . The range is from 0 to 9999, and the typical code is 1. The default is NULL (none). Press
save .
6. Press the Volume button (up or down) to return to the DB Item Select screen.
7. Next, program the local area codes. Local area code programming requires two entries; first the local area
code, then the code required as a prefix when this telephone number is dialed from CID memory (usually
the same as local area code).
8. Enter 03-28 , then press save . When you press show , area code table 1 displays.
9. Press chg to enter the actual local area code that will be received with CID from the local calling area.
10. Key in the local area code for the customer’s site, and press Enter . The range is from 0 to 999. The default
is NULL (none). Press save .
11. Press next . This area code’s prefix displays.
12. If the area code must be dialed to complete local calls within that area code, press chg . Enter the code you
want the system to dial (usually the same digits as the area code) when dialing local calls, and press Enter .
Note : Use this field when 10 digit dialing is required on local calls. The range is from 0 to 999. The
default is NULL (none).
While many local calling areas only include one area code and prefix, some local calling areas contain sev-
eral. If you need to specify more than one local calling area code and prefix, use the remaining area code/
prefix fields to do so. If you do not need multiple local area codes/prefixes, leave the remaining area code/
prefix fields set to NULL.
13. Press save .
14. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.