Vertical Comdial DX-80, Техническое руководство

Страница: 59 / 322

- 59 -
4. PROGRAMMING SYSTEM FEATURES
The system features allow you to control system administration and to assign system resources. The DX-80 pro-
vides programmable features that allow you to establish these various settings.
To set up the system features, perform the following tasks.
1. Establish the database administrator password.
2. Assign the attendant extension for each tenant group.
3. Assign the system reminder for each tenant group.
4. Set the user passwords for extensions 101, 102, and 108.
5. Specify the user names for extensions 101 and 108.
6. Name each CO line (1-16).
7. Set up the pre-programmed incoming and outbound messages.
8. Program speed dial numbers.
9. Set the number of items in the Caller ID table.
10. Establish the music source for the each tenant group.
11. Assign the external pager ID to a tenant group. Enable/disable page group 1 and 8.
12. Program ancillary devices (loud bell, external page, music on hold source).
13. Allocate the DSS.
14. Set up the optional internal modem.
15. Select the PC-DBA transmit rate.
16. Select the SMDR transmit rate.
17. Set up the ring scheme.
18. Specify the letter type.
19. Set up the system time, date, and hour mode.
20. Set up the numbering plan you want to use. The DX-80 has a built-in numbering plan that you can use as
is or modify if necessary.
While you are programming in PC-DBA, the system saves your changes in the working directory residing on the
laptop. While it may appear that you have re-programmed the switch, the system does not update the switch
database with your changes until you perform a SEND command from the laptop.
For further details on the SEND command, see Section 2.1.4.4, F4 – Send .
CAUTION
If PC-DBA is set to U-Save, your database changes reside only on
your laptop. When you have finished making all changes to the data-
base, perform a SEND operation to download the new database to the DX-80 switch.
DX-80 Programming Manual