Vertical Comdial DX-80, Техническое руководство

Страница: 270 / 322

P
ROGRAMMING
E
XTENSIONS
> S
ETTING
U
P
C
ALL
F
ORWARD
– E
XTENSION
P
REDEFINED
DX-80 Programming Manual
- 270 -
13. Locate the directory/extension number you want to program. You may need to press Page Up or Page
Down to find the directory number; this menu contains five pages.
14. Highlight Paging Group and press Enter to select the paging group for this extension. Valid choices are
paging groups 1 through 8. The default is paging group 1. If you want to allow external paging for this
extension, be sure that external paging has already been set up and assigned to the paging group you want to
use. For details on setting up external paging, see Section 4.11,
Assigning External Pager ID .
15. In the same manner, assign extensions to paging groups as needed.
16. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
17. The system prompts “Save Current Setting?” Press Y to save your changes.
18. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
19. Press Esc to return to the Database Programming menu.
20. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
10.14 Setting Up Call Forward – Extension Predefined
The Call Forward -- Extension Predefined feature allows you to control where the system forwards a call when an
extension does not answer. You may want the system to forward these calls to the attendant extension, a depart-
mental secretary, another department, etc. This feature is extension specific; that is, the system forwards all unan-
swered calls to a specific extension.
Note : If you want to forward unanswered calls for all calls coming in on a
CO line, instead set that up in the CO line programming. For more details, see Section 5.12, Setting the Pre-
Defined Call Forward No Answer.
Extension Predefined Call Forward affects ringing intercom calls and transferred calls. The programmed
Extension Predefined Forward is a single step only forward destination (you cannot assign a second or third step).
You can assign two destinations based on station status: Busy and No Answer. That is, you can use different desti-
nations for busy calls than for calls that go unanswered.