Vertical Comdial DX-80, Техническое руководство, Страница: 119 / 322

- 119 -
DX-80 Programming Manual
P
ROGRAMMING
CO L
INES
> S
ETTING THE
CO L
INE
T
YPE
6. In the same manner, assign the dial type for other CO lines as needed.
7. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
8. The system prompts “Save Current Setting?” Press Y to save your changes.
9. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
10. Press Esc to return to the Database Programming menu.
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
5.6 Setting the CO Line Type
You can assign each CO line one of the following CO line circuit connection types.
CO CO type line circuits are standard interface lines that require no special
handling for advanced system features.
PBX The PBX line type invokes system automatic operations for handling of
PBX ports. When the user dials a programmed PBX trunk access code,
the system is alerted that the user is accessing a telephone company
facility to make a network call. When this occurs, the system monitors
digits dialed after the PBX access code and compares them against the
allowed digit interval table in that station’s class of service. The
programmed PBX trunk access code also tells the system to insert a pause
when re-dialing telephone numbers dialed on that CO line, beginning with
the PBX access code. This operation applies for Speed Dial, Last
Number Redial, Saved Number Redial, Memo Pad, and Automatic
Redial.
EMPTY Use this assignment for CO lines equipped on the system, but not
connected to telephone company network facilities. The EMPTY type
eliminates the CO line from access by system features that automatically
access CO line resources.
CO DEV The CO DEV type identifies a CO line circuit as being connected to
special apparatus. This type effectively removes the CO line circuit from
automatic access by system features, while maintaining its direct
accessibility for the specific purpose of its connection. (Typical use would
include connection of ancillary analog intercom calling device.)
PAGE The PAGE type identifies a CO line circuit as being connected to special
apparatus. This type effectively removes the CO line circuit from
automatic access by system features while maintaining its direct
accessibility for the specific purpose of its connection. (Typical use
would include connection of ancillary paging equipment.)