82
CineCast HD Version 2.6 Installation and User Manual
0047 Video/Audio Fade
2. Issue a Fade Down to Channel 0, usually sent inline to execute on a Frame
Count (inline mode 3) or GOP TimeCode (inline mode 1). The fade down will
start executing when the trigger frame/TimeCode occurs. When the fade down
completes, the primary channel will set GPI2 signal the secondary decoder to
begin the fade up. Also when the fade down is complete, the Audio/Video
Mux hardware will select Channel 1 (secondary) audio and video sources.
Fade Secondary to Primary with a Fade time of 60 frames
1. Issue a Fade Up to Channel 0 using inline execution mode GPI2 Active
(mode 8). The Fade Up will start when Channel 1 completes the fade down
and sets GPI2.
Fade down issued to Channel 0 (primary decoder)
Video Fade Enable
= 1b
Video fade enabled.
Video Source
= 1b
Vela Media bus will be the new
source, i.e., channel 1 video.
Fade Down/Up
= 1b
Fade down.
Secondary Decoder
= 0b
Channel 0 is Primary decoder (output
is monitored from this channel).
Audio Output A Source
= 000b
Audio decoder 0 channels 1,2.
Audio Output B Source
= 001b
Audio decoder 0 channels 3,4.
Audio Output C Source
= 100b
Audio decoder 1 channels 1,2.
Audio Fade Enable
= 1b
Audio fade enabled.
Audio Source
= 1b
Vela Media bus will be new source,
i.e., channel 1 audio.
Video Fade Time
= 30
30-frame video fade down.
Audio Fade Time
= 30
30-frame audio fade down.
Fade up issued to Channel 0 (primary decoder)
Video Fade Enable
= 1b
Video fade enabled.
Video Source
= 0b
MPEG video decoder output (channel
0 video).
Содержание 2000-0600
