Vela 2000-0600, Инструкция по установке и эксплуатации

Страница: 32 / 179

22 CineCast HD Version 2.6 Installation and User Manual
Software Installation
• A “DO NOT REMOVE THE CD” message box will display as a reminder
that a number of reboots may be required during the installation process.
Click OK to continue.
• If you have chosen to run the MFC Update option, the installation process
will begin here to copy files.
• On the “Install” message box (Figure 1-10), note that the system must
be restarted. Click OK, and then wait as the system reboots. Leave the
CD-ROM in the drive through the system restart process.
10. If you remembered to leave the CD-ROM in the drive, the setup application
will appear soon after the reboot. Continue the installation by following these steps:
• On the “CineCast License Agreement” screen (Figure 1-11), select the “I
Agree” radio button after reading the agreement. Then click OK. The
application will install some files.
11. If you elected to install the SDK:
• Select the “I Agree” radio button on the “CineCast SDK End User
License Agreement” screen (Figure 1-12). Click OK.
• On the Password screen (Figure 1-13), you will be asked for a password. Use
the one supplied when you purchased your Software Developer’s Kit. If you
have problems finding your password, contact Vela Support. After entering
the password, click OK. A few more files will be installed.
12. On the “Installation Complete” screen (Figure 1-14), note that CineCast 2.6
has been successfully installed. Click Finish.
13. The “Install” message box (Figure 1-10) will note that the system must be re-
started. Click OK, then let the system reboot.
Leave the CD-ROM in the drive .
14. After the system has been rebooted, close the setup application if it is active,
then remove the CD-ROM disc from the drive.