Vela 2000-0600, Инструкция по установке и эксплуатации

Страница: 66 / 179

56 CineCast HD Version 2.6 Installation and User Manual
DECODER Command (45h)
0039 Switch Audio Input Select No
003A Set Output Discretes Yes
003D Set Transport Program ID (PID) Yes
003E Set Freeze Field/Frame Yes
0046 Genlock to SDI Timing Adjustment Yes
0047 Video/Audio Fade Yes
Inline: When set to 0, commands are executed immediately; when set to 1, com-
mands executed “inline.” “Inline” commands will remain pending until the specific
event occurs, as defined in Inline Mode.
InLine Mode: Determines by what event the inlined command is activated. The
following table illustrates typical inline modes and event triggering commands:
Inline
Mode
Inline Event Triggering Command Execution
0001b Output SMPTE Time Code Mode: Command will remain pending until a
specific output time code (either MPEG GOP time code or extracted VITC
time code) is reached. Use command 0004 Set Time Code to set the spe-
cific time code.
0010b Reserved
0011b Frame Count Mode: Command will remain pending until a specific frame
count is reached. Use command 0024 Set Frame Count to set the specific
frame count.
0100b Playback Start: Command will remain pending until MPEG play has
started.
0101b Playback End: Command will remain pending until MPEG play has
stopped.
0110b GPIN1 Active: Command will remain pending until GPIN1 is activated
(grounded).
0111b GPIN1 Inactive: Command will remain pending until GPIN1 is deacti-
vated (open).
1000b GPIN2 Active: Command will remain pending until GPIN2 is activated
on VMB.