Vela 2000-0600, Инструкция по установке и эксплуатации

Страница: 112 / 179

102 CineCast HD Version 2.6 Installation and User Manual
WRITE BUFFER
64-KB Transfers
128-KB Transfers
Since the microcode size varies, the last block of microcode data may not fall on
an even 64-KB boundary. This partial block of data must be zero-padded to make
it 64KB in size.
The download and save process takes approximately 60 seconds to complete.
Adjust SCSI command time-outs accordingly.
After the download is complete, the power must be cycled to restart decoder
operation with the new microcode. Alternatively, a SCSI Reset or Bus Device
Reset can be issued.
NOTES: (1) The MPEG FIFO buffer area is used during this command. No
WRITE
(6)
or
WRITE
(10) commands can be used during a microcode download sequence.
(2) Power should not be cycled during execution of the download sequence. An inoper-
ative condition may result.
Mode 5 (101b)
Buffer ID 0
Buffer Offset 0, 10000h, 20000h, 40000h, …
Parameter List Length 10000h (64KB)
Mode 5 (101b)
Buffer ID 0
Buffer Offset 0, 20000h, 40000h, 60000h, …
Parameter List Length 20000h (128KB)