V-TEK TM-500 Скачать руководство пользователя страница 57

Страница: 57 / 254

3-10

TM-500 User’s Guide

Menus

D292144.6.fm

Note:

Changing the logo image file will change the logo for all printed reports and labels.

• To resize the report logo,

click and drag

the logo on the top left side of the

Job Statis-

tics

screen.

• To change the logo position, click the logo then press and hold the

Ctrl

key and use the

mouse to move the logo to the desired position.

• Any changes to the logo are automatically saved for future reports.

Press the

Settings

icon to open the

Systems Options

screen.

The

System Options

screen has two tabs:

End of Job Reporting

and

Bar Code Settings.

End Of Job Reporting

The

End of Job Reporting Tab

allows the user to choose between

Manually

saving the

Job Sta-

tistics Report

and

Automatically

saving the report.

• If

Manual

is selected, the user must use the

Report Options

Save

button to save the

Job Statistics Report

at the end of the

job. If this setting is selected and the user fails to manually save
the report, the data will be lost.

Save

Содержание TM-500































































































































































































































































Результаты поиска

Содержание TM-500

Отзывы:

Похожие инструкции для TM-500

Бренды по названию

Популярные бренды

V-TEK TM-500, Руководство пользователя

Результаты поиска

Содержание TM-500

Отзывы:

Похожие инструкции для TM-500

Бренды по названию

Популярные бренды