V-TEK TM-500, Руководство пользователя

Страница: 50 / 254

D292144.6.fm Introduction
Chapter 3: Human Machine Interface 3-3
There are multiple ways to reach each HMI screen. With the single exception
of the
Main Screen , every screen has a list of tabs that lead to configuration
settings for job, pick head and all installed input, output and inspection mod-
ules.
The active tab is indicated by a red line on the left of the tab button. In the
example on the right, the Tray Tab is selected. Only the tabs for Job , Head ,
Run and the currently installed Input , Output and Inspection modules will
appear on the tab menu. In the example on the right, the input is Tray , the
output is to Taper and there are 2D Tape and Upwards 2D Inspection mod-
ules installed.
Each tab has a Tab Menu on the left which will take the user to the other active HMI
screens.They also include a variety of drop-down menus on the top of the screen. The Tray Tab
is pictured below.
Drop-down Menus
Current X,Y, & Z Axis Position
Connection Status