V-TEK TM-500, Руководство пользователя

Страница: 151 / 254

6-2 TM-500 User’s Guide
Emergency Stop D292144.9.fm
Emergency Stop
If the Emergency Stop button is pushed, the TM-
500 will automatically enter an Emergency Stop
state.
There are four E-Stop buttons on the TM-500.
Two are located on the front of the machine and
two are located on the back of the machine.
When an Emergency Stop is triggered, a brief
alarm sounds, the Tower Light switches to red
and all operations cease. On the HMI, an E-Stop
status message will appear.
Activating an Emergency Stop
If a malfunction occurs, follow the steps below to resolve the failure.
1. Press the red E-Stop button to place the TM-500 into an Emergency
Stop state. A brief alarm will sound, the Tower Light will switch to flash-
ing red and all operations will cease. On the HMI, an E-Stop status
message will appear.
2. Resolve the problem.(See Chapter 7: Troubleshooting for tips on resolving error conditions.)
Clearing an Emergency Stop
To clear an Emergency Stop , follow the directions below.
1. Twist the activated Emergency Stop button to turn it off and reset the button.
2. Close all the doors on the TM-500.
3. Press the blue Reset button.
4. Press the green Start button on the machine or
press the Run button on the HMI Run Tab to
resume operation.
Front Side
E-Stop