Toshiba VP 300, Руководство по установке

Страница: 474 / 614

If the display does not contain this information, determine the cause and correct the
problem before continuing.
L. Now press the Superset 4 prime line key. The display should contain this information:
XXX is the trunk number.
If the display does not contain this information, determine the cause and correct the
problem before continuing.
M. Press the EXIT softkey on the Superset 4 (this should appear as softkey 1). The time
and date should return to the display. Hang up phone A.
5. PBX RING-NO-ANSWER FORWARD TEST
This test verifies that an extension can forward to the VP 300 on a ring-no-answer
condition.
A. Set phone B to forward to the Superset 4 on a ring-no-answer condition by dialing the
feature access code for Call Forward – Don’t Answer followed by the extension
number of the MIC port to which the Superset 4 is connected. After setting forwarding
for phone B, make sure phone B is on-hook.
B. From phone A, call the extension number of phone B. Does phone B ring?
NO
➧
Determine the cause and correct the problem before continuing.
C. After the number of rings configured for ring-no-answer forward in phone B’s PBX
COS, does phone B stop ringing and the Superset start ringing?
NO
➧
Determine the cause and correct the problem before continuing.
D. Answer the Superset. Hang up the Superset and phone A.
6. PBX FORWARD ALL CALLS TEST
This test verifies that an extension can forward all calls to the VP 300 access number.
A. Set phone B to forward all calls to the Superset 4 by dialing the feature access code for
Call Forwarding – Follow Me followed by the extension number of the MIC port to
which the Superset 4 is connected. After setting forwarding for phone B, make sure
phone B is on-hook.
B. Using phone A, call the extension of phone B. Does the Superset 4 start to ring?
NO
➧
Determine the cause and correct the problem before continuing.
C. Answer the Superset. Hang up the Superset and phone A. Cancel forwarding for phone
B.
7.
MESSAGE WAITING INDICATOR TEST (MWI ONLY)
7A. MWI Test With Superset 4 Sub-Attendant Feature
This test verifies that a message waiting indicator can be set and cleared using the
Superset 4 sub-attendant feature.
TXXX CALLING
DISPLAY…
Toshiba VP Systems Release 7.1 July, 1994
10.1-30 Installation and Maintenance Manual