GTCOM2 User manual
14 |
E N
From the security control panel receives CONTACT ID message as follows:
ACCT MT Q XYZ GG CCC S
ACCT - 4-digit number.
MT - message type 18 or 98 CONTACT ID message.
Q - event qualifier:
1 = Alarm, new event or opening
3 = Restore or closing
6 = event state report
XYZ - event code (3-digit Hex 0-9,B-F) see annex
GG - 2-digit subtype number.
CCC - Zone or user number depending on what type of message has been
received.
S - Control sum of the message.
The following message codes are being described in order to convert
CONTACT ID message into SMS text:
Q:XYZ:GG:CCC
Q- event qualifier, XYZ-- event code, GG- partition,
CCC-zone/user number.
CONTACT ID messages are described in Sera2> PSTN CID to
SMS converter window in 3 tables: [XYZ], [GG], [CCC]
Event description text may be changed. Thus desirable text may
be generated for every received CONTACT ID message.
Step by Step
1.
Go to Sera2> GSM Communication> SMS/ DIAL reporting. Enter phone numbers, mark events, and edit settings.
2.
Go to Sera2>PSTN CID to SMS Converter> [XYZ] Contact ID Event Code
. Edit text in “Alarm SMS Text”, “Restore SMS Text” Select Type.
3.
Go to Sera2>PSTN CID to SMS Converter> [CCC] User/ Zone Name. Enter User Name
4.
Edit partition name in Sera2>PSTN CID to SMS Converter> [GG] Group or Partition window
5.
Enter phone numbers for remote control in Sera2> Users/ Access control window
6.
Press “Write”
Figure 14 Sera2> PROGATE> PSTN CID to SMS Converter
