GTCOM2 User manual
45 |
E N
Communication with monitoring station status.
Figure 73 Events Log window.
What should you do, if you noticed, that
there is
Sensor trouble in the “Event Log” window
?
1.
It is comfortable to use “RT Testing&Monitoring” window. Red field indicates sensor’s troubles.
2.
Go to Automation/ Sensors window, d
isabling this sensor and press “Write”. Maybe there is the problem with sensor’s connection
to the module.
3.
If the problem still exist, please read, save and send the configuration to the seller. Describe what and how is connected to zone:
001 and send this information to the seller.
6.11 Automation & Sensors Programming
The most important information due to automation with the module GTM1
Sensors
. The module can receive signals from standard sensors that produce a standard analog or pulse output. Sensor’s parameters should be set by
SERA2 software.
Remote Monitoring, Control It is possible to monitor, control or log data by using GSM GPRS network from almost any location around the world. The data
transmitting via GPRS using TCP/IP protocol; the GSM module connects to the internet via a GPRS cannel to SeraServer server tool who registering all
devices. The connection is established by the SERA2 configuration tool using unique id. The SeraServer is designed to make setup and use fast and easy
setup and configuration.
Remote monitoring. Using the GSM, GPRS remote access from the simplest application, viewing data to more sophisticated uses, such as sending a text
message when an alarm occurs or transmitting a data log file over the internet from a remote location to a central office. A user can access this data
anytime, anywhere.
Testing & Monitoring. You need to monitor the temperature, humidity maybe even the security
Localized Monitoring Systems.
Perfect for many applications, SeraServer technology can be used in labs, clean rooms, museums, warehouses, computer
rooms, food processing/storage, hospitals, and greenhouses, as well as HVAC, pharmaceutical, electronic assembly, and many more
environments.
Depending on your specific application, you can monitor ambient temperature, humidity, or use a thermocouple or other process. Sensor
with analog voltage/current or pulse output, and make the data available anywhere. The Sera Server can be configured quickly and easily you can even
use a SERA2 program.
Step by step to set the parameters of security system:
Installation:
Install the module GTM1 and sensors (PIR, smoke detectors, door contacts
Connect the GSM antenna to the antenna connector. Insert the SIM card in the SIM card holder. Ensure that PIN request function is disabled.
Connect the battery
Connect the power supply
Connect the sensors (PIR, smoke detectors, door contacts) to the module GTM1, according connecting diagrams
Connect Bell, Siren to the output of the GTM1, according connecting diagram
Connect Wiegand keypad and RFID reader, according connecting diagram
Configuration:
Install SERA2 software
Connect the module to the computer via mini USB cable.
Configure sensors parameters
Configure PGM outputs
Enter user phone numbers for system parameters monitoring
Read information about arming/ disarming and systems operation algorithm
Enter user phone numbers for remote control of the outputs
Set reporting to server details
Read event Log
Real time sensors inputs, system outputs monitoring
Figure 74Sera2> Events Log window
