GTCOM2 User manual
37 |
E N
Users/ Access Control > Remote Control Users Table
The Users/ Access Control Table window let you set remote control
options.
The system supports up to 800 user phone numbers for remote control purpose. When the phone number is set, the user will be able to arm/disarm
the system and control outputs via SMS text messages and free of charge phone calls as well as to configure the system by SMS text messages. By
default, the system accepts incoming calls and SMS text messages from any phone number. Once a user phone number is listed, the system ignores any
incoming calls and SMS text messages from a non-listed phone number as well as it rejects the SMS text messages containing wrong SMS password
even from a listed user phone number.
The module could be controlled only by these users, whose phone numbers entered in the memory of the module
Figure 60 Users/ Access control window
The module GTCOM2 controls access by using schedules. Inputs, outputs, readers and cards through access levels are all configured with schedules by
which they will be energized or de-energized, enabled or disabled. For example, you might assign an output to be energized from 12:00 a.m. to 6:00 a.m.
every day. The 12:00 a.m. to 6:00 a.m., Monday through Sunday, time period is called a schedule
. The “Access Schedules” tab enables you to create
the schedule you will use to configure your GTM module. Click
“Access Schedules” tab to display the Schedules screen:
Figure 61 Users/ Access Control > Users, Users Access Control> Access Shedules and Users/ Access Control> Holidays window
Go to Sera2> System Options> Digital I/O Settings
Set Digital I/O D1 to Dallas 1-Wire Bus.
Go to Sera2> System Options> General system Options.
Press "Start iButton/ RFID/ Phone programming mode.
