Topkodas GTCOM2, Инструкция по установке и программированию

Страница: 24 / 60

GTCOM2 User manual
24 | E N
3. When all changes has been done, the configuration should be written to module, by pressing write icon.
Figure 32 Command line
Any automation voltage analog sensors 0-10V, can be connected to IN1-IN4 (has internal pull up resistor 5.1K) , and I/O1, I/O2
Please visit: Step by step: How to check real time hardware status, real time sensor values. How to receive
alarms and where find alarm events list?
Real time hardware status: RT Tes
ting & Monitoring> Hardware. Press “Start Monitoring”
The list of alarm events with time and date stamp: RT Testing & Monitoring> Event Monitoring
It is possible to receive alarm SMS to the mobile phone: GSM Communication> SMS/ Dial reporting
Real time sensor values and states: RT Testing & Monitoring> Sensors/ Automation.
3.5.3 Temperature sensors Dallas 1-wire DS18b20 installation & recommendations
The DS18B20 digital thermometer provides
12-bit Celsius temperature measurements.
The DS18B20 communicates over a 1-Wire
Each DS18B20 has a unique 64-bit serial
code, which allows multiple DS18B20s to
function on the same 1-Wire bus. Thus, it is
simple to use one to control many
DS18B20s distributed over a large area.
Applications that can benefit from this
feature
include HVAC environmental
controls, temperature monitoring systems
inside buildings, equipment, or machinery,
and process monitoring and control
systems.
Applications/Uses

Consumer Products

Industrial Systems

Thermally Sensitive Systems

Thermometers

Thermostatic Controls
Key Features

Measures Temperatures from -
55°C to +125°C (-67°F to +257°F)

±0.5°C Accuracy from -10°C to +85°C

Each Device Has a Unique 64-Bit code.
3.5.3.1
Wiring Dallas 1-wire DS18b20
Refer to:
RT Testing & Monitoring. Hardware.
Refer to:
Real-time Testing & Monitoring > Event Monitoring
Refer to:
Reporting to the user‘s mobile phone
Refer to
Real-time Testing & Monitoring > Sensors/ Automation
Figure 31 0-15V sensor connecting
diagram
Figure 33 System Options> General System Options
Figure 30 Automation/ Sensors window
Figure 34DS18b20 sensor