GTCOM2 User manual
43 |
E N
3. If programmed, the system attempts to ring the first user phone number via GSM. The system will dial regarding each violated zone separately.
The system will dial the next listed user phone number, assigned to the same zone. The user can be unavailable due to the following reasons:
Mobile phone was switched off, mobile phone was out of GSM signal coverage or provided “busy” signal.
d) The system will continue dialing the next listed user phone numbers in the priority order. The system will dial again as many times as programmed and
the same order as phone numbers listed in the memory if it end up with all unsuccessful attempts to dial to the user.
The module could be controlled and monitored only by these users, whose phone numbers entered in the memory of the module
Figure 69 GSM Communication> SMS/ DIAL reporting
6.7.2
Custom SMS Text
GSM Communication > Custom SMS Text
The Custom SMS Text options let you enter the text that will be send to the user in case if
the alarm event occur.
6.8
Event Summary (Events)
Event Summary (Events)
The Event Summary (Events) window illustrates Contact ID codes of the events and enable user to change the text
that will be reported in case if the event occur.
Figure 70 GSM Communications> Custom SMS Text
