GTCOM2 User manual
33 |
E N
After configuration of the module, all settings may be saved at PC
. It enables to save time, when next time the same configuration will be used
– it
will not be necessary again to set the same parameters. If you want to save that is already recorded by the module, firstly you must read configuration of
the module
. Press Read 4 icon. In order to save configuration go to File 1
then press “Save As” or “Save”.
Enter configuration parameter in the
displayed table and press „OK“
In order to start saved configuration go to File then press Open.
It allows to copy the same programmed content into as many modules as required.
If you want to receive so
ftware updates, go to Settings and mark “Check for Updates
Automatically”. When new update will be available, the program will inform you, and you
have to start the update. After that you have to connect the module to the computer via
mini USB cable. You have to write this update to the module GTCOM2 by pressing
“Update” in the bottom line in SERA2 software.
If you want to update the module manually, got to “About” and press “Check for updates”
If you need to contact the seller with the questions about the configuration, you have to
:
Press “Read” icon first to read the configuration from the module, the press “File>Save us”
and save the configuration.
Save the Events Log file and send these files with the question to the seller.
These steps will let better understand the problem and will reduce the time to find the solution.
Figure configuration at the same time
52Unlimited number of modules
An unlimited number of modules can be configured remotely on the same computer at the
same time. The configuration reading and writing speed does not decrease because the
processes are running in parallel. Many Sera2 programs could be opened and used at the
same time.
6
Reporting to the Central Monitoring Station
6.1
GPRS/ IP/ TCP/ UDP details programming
GSM Communication > GPRS/ IP/ TCP/ UDP
The GPRS/ IP/ TCP/ UDP window let you set GPRS, IP, TCP and UDP parameters
Figure 53 GSM Communications> GPRS/IP/TCP/UDP
6.2
Central Monitoring Station details programming
Figure 51Press about in the command line
