Tokyo Sokki Kenkyujo TC-32K, Руководство по эксплуатации

Страница: 70 / 133

6.2 Data memory
6-5
■
Deletion of data in data memory
This operation is to delete measurement data stored in the data memory.
■
Printout of data memory
This operation is to output measurement data stored in the data memory to an external printer.
○
Ring buffer setting
Move the cursor with
[
◄][►]
keys and
select either “ Off
” or “
On
”.
1. Move the cursor (reversed indication) with
[▲][▼]
keys on the Data memory screen
and press [ENT] key, or press [3] of ten
keys, to go to “Deletion of data of data
memory”.
2. Move the cursor to “Ok” with
[
◄][►]
keys, and press [ENT] key.
○ Repeated measurement with ring buffer ON
When the data memory capacity is fully
occupied and recording of data is in the
second cycle or later, the indication changes
as shown in the left.
1. Move the cursor (reversed indication) with
[▲][▼]
keys on the Data memory screen
and press
[ENT]
key, or press
[4]
of ten
keys, to go to “Printer Output of data
memory”.
2. Specify the range to print.
Move the cursor with
[
◄][►]
keys, and
increase/decrease the values of “From”
and “To” with
[▲][▼]
keys, or input the
values directly with ten keys.
3. After the setting is completed, press
[ENT]
key. Printing is started.
4. The display returns to Data memory screen
after the completion of printing.