Tokyo Sokki Kenkyujo TC-32K, Руководство по эксплуатации

Страница: 52 / 133

5.8 Automatic measurement
5-15
5.8 Automatic measurement
This function allows recording of measurement data at the set time or set interval.
■ Interval measurement
“Interval measurement” is a function to measure and record data automatically at a regular
interval called “interval time”. This section explains outline of this function by the case
where the program consists of three steps and each step is repeated twice.
One step is made up with the time setting and the number of repetitions. Step 01, Step 02
and Step 03 are executed sequentially. Up to 5 steps of interval measurement are
available.
Measurement timing of each setting is shown below:
Step Content
Number of repetitions
01
Measures at intervals of 00-hour/01-minute/00-second
Twice
02
Measures at intervals of 00-hour/04-minute/00-second
Twice
03
Measures at intervals of 00-hour/30-minute/00-second
Twice
In addition, “Real time start” allowing controlling of steps at the execution start time, and
“Goto step” allowing loop control of steps, which are mentioned later, are available.
■ Interval timer setting
You can set the interval and the number of repetition for automatic measurement and
recording at a regular interval (interval time).
Step 01 Step 02
Step 03
70 [minute]
Time
Interval measurement concept
：
Automatic measurement point by interval timer
○
Do not change
“Date and time setting” after starting interval measurement.
○
The interval measurement function does not work if a screen other than the
monitor screen is displayed. After starting interval mea surement, restore the
monitor screen.
Note
1. Move the cursor (reversed indication) with
[▲][▼]
keys on the Menu screen and press
[ENT] key, or press [3] of ten keys, to go to
“Auto measurement”.
Start
40 10 6 2 1 0