Tokyo Sokki Kenkyujo TC-32K, Руководство по эксплуатации

Страница: 97 / 133

8.7 Factory setting
8-11
■
List of factory setting
The list below shows the details of factory setting.
Monitor
Monitor channel 0
Displayed measurement value Direct
Measurement mode Single channel mode
Program setting
Sensor mode 4GAGE (Full bridge)
Coefficient 1.00000
Unit
με
Indication digits ###### (No decimal point)
Thermocouple RJC Internal RJC
Auto measurement setting
Interval measurement setting No setting for all steps
Setting related to measurement
Simple measure setting Not used
Comet setting Comet A
Power source frequency of
measurement environment
50 Hz
Initial-in measurement Enable
Burnout check setting No
Recording related Item
Data memory Data number 00000
Ring buffer setting On
CF card File name dat000
File format CSV1
Interface related item
RS-232C (*1) Baud rate 9600
Data bit 8bit
Stop bit 1
Parity Non
Flow control X-ON/X-OFF
Timeout 5 seconds
Data output destination Off
Data output format Data format TDS
Header On (attached)
Time data On (attached)
External indicator Baud rate 19200
Parity Non
Other settings
Auto power-off setting On, 10 minutes
Language (*1) Japanese
Maintenance LCD backlight setting Always OFF
LCD backlight
brightness
Medium
Contrast 3
Sound volume Medium
(*1): These settings remain the same as the settings just before the execution of
factory setting operation.