Tokyo Sokki Kenkyujo TC-32K, Руководство по эксплуатации

Страница: 20 / 133

2.5 Operation outline
2-8
2.5 Operation outline
From the monitor screen, you can move to various modes with three function keys. This section explains
these function keys and systems, and the keys used for operation and their functions.
■ Operation system
The operation system of TC-32K is shown below:
Monitor screen
Process of Initial value
Initial-in
Initial-in of monitor channel
Rewriting of initial value
Channel setting
Measurement mode switching
CSW-5B setting
(only in multi-channel mode)
Monitor type selection
Menu
Program setting
Sensor mode
Coefficient , Display digit, Unit
Coefficient
Display digit
Unit
Cap/R.O. setting
Coefficient setting check
RJC for thermocouple
Reading of TEDS sensor
Measurement mode switching
Measure/Direct switching
Auto measurement setting
Interval measurement setting
Interval measurement Start/Stop
Various checks
Insulation check
Resistance check
Dispersion check
Lead wire resistance check
Bridge output check
Coefficient setting check
Settings for measurement
Simple measure
Comet
Power frequency
Initial-in permission
Burn out check
Menu
Memory
Data memory
File dump
Data memory setting
Data number setting
Ring buffer setting
Deletion of data memory
Printout of data memory
CF card
File dump
File name and format setting
Deletion of files
Saving data files
Reading the saved files
CF card formatting
Copying the file
Record on data memory, CF card
Interface setting
RS-232C setting
Baud rate
Data bit
Parity
Stop bit
Flow control
Timeout
Data output destination setting
Data output format setting
Data format
Presence of header
Presence of time data
Settings for external display
Baud rate
Parity
Other settings
Auto power off
Version information
Date and clock
Display language
Maintenance
LCD backlight
LCD brightness
Contrast
Alarm sound volume
Upgrading
Factory setting