background image

VBOX Touch V2 Lap Timing Mode - Quick Start Guide

VBOX Touch features a 25 Hz GNSS receiver and a responsive colour touchscreen. The Lap Timing Mode allows you
to view live Lap Timing information in relation to a set Start/Finish line.

Two Lap Timing screens are available; the

Main Screen

, which contains live reference lap speed comparison (Delta-V),

live reference lap time comparison (Delta-T), current reference lap time, last lap time, last lap time difference to best,
session time and completed lap count. The

Basic Screen

contains either just a rolling lap time or a static previous lap

time.

Registration

Please register your VBOX Touch so that Racelogic can
continue to provide you with notifications about the latest
software releases and firmware upgrades for your
Racelogic product, and offer technical support.

Register your device

here

.

What is in the box?

When you purchase a

VBOX Touch Motorsport V2

(RLVBTOUCH-M), you will find the following items when you open

the box:

https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/VBOX_Touch_V2/

Quick_Start_Guides_%E2%80%93_VBOX_Touch_V2/VBOX_Touch_V2_Lap_Timing_Mode_-_Quick_Start_Guide

1

Summary of Contents for VBOX Touch

















Reviews: