Tokyo Boeki Labmax 240, Руководство по обслуживанию

Страница: 154 / 178

5‑14
5.6.2 STM-R (Sample Probe - Rotation)
1. Explanation of Function
2. INIT To move to the home position. (And to stop when detecting the
home sensor.)
3. OFFSET To move for the corrective value set in the offset screen.
4. ADJUST To input the angle to move by value, and to select the direction
of rotation.
5. D-CELL -> CELL To move from the reaction cuvette (dilution position) to the
reaction cuvette.
6. WASH -> OUT-S To move from the washing trough to the outside sample cup.
7. WASH -> IN-S To move from the washing trough to the inside sample cup.
8. OUT-S -> CELL To move from the outside sample cup to the reaction cuvette.
9. IN-S -> CELL To move from the inside sample cup to the reaction cuvette.
10. CELL -> WASH To move from the reaction cuvette to the washing trough.
11. OUT-S -> ISE To move from the outside sample cup to ISE.
12. IN-S -> ISE To move from the inside sample cup to ISE.
13. ISE -> WASH To move from ISE to the washing trough.
14. OUT-S -> DCELL To move from the outside sample cup to the reaction cuvette
(dilution position).
15. IN-S -> DCELL To move from the inside sample cup to the reaction cuvette
(dilution position).
16. CELL -> IN-S To move from the reaction cuvette to the inside sample cup.
17. CELL -> OUT-S To move from the reaction cuvette to the outside sample cup.
18. Low Speed * Starting pulse rate
19. High Speed * The highest speed pulse rate
20. Pulse Count * Adjustable speed pulse count
21. Init Speed * Pulse rate of initialization
* shows that setting is not needed.
Manual Function (STM-R)