Thermo Scientific iCAP Q, Руководство по эксплуатации

Страница: 70 / 134

Operation
Shutting Down the System
6-8 iCAP Q Operating Manual (P/N 1288090, Revision B) Thermo Fisher Scientific
2. Switch off the vacuum system in the Instrument Control window
a. Click in the Vacuum submenu
Wait until the system is fully vented.
3. Switch the main power switch to position Off, see Figure 6-2 .
Shutting Down the Instrument only (Instrument not Vented)
Initial position:
•
The experiments are finished.
•
The plasma is still lit.
•
The system was flushed.
NOTICE If the plasma is not lit, start with step 2 . ▲
❖
To shut down the instrument
1. Click inside the Experiment Editor window. The
plasma is switched off.
2. Switch the main power switch to Off position.