Thermo Scientific 410i, Инструкция по эксплуатации, Страница: 267 / 321

C-Link Protocol Commands
Calibration
Thermo Fisher Scientific Model 410
i
Instruction Manual B-27
stream time
This command reports if the streaming data string will have a time stamp
attached to it or not, according to
Table B–6 . The following example
reports that the streaming data shall not include a time stamp.
Send: stream time
Receive: stream time 0
set stream time value
This command enables value , where value is to attach or disable time stamp
to streaming data string, according to Table B–6 . The following example
attaches a time stamp to streaming data.
Send: set stream time 0
Receive: set stream time 0 ok
Table B–6. Stream Time Values
Value
Stream Time
0 Disables time stamp to streaming data string
1 Attaches time stamp to streaming data string
set cal co2 bkg
set zero calibrate
These commands will set the CO
2
background. The following example
shows a successful auto-calibration of the CO
2
background.
Note Zero air must be provided to the instrument prior to issuing any of
these commands. ▲
Send: set cal co2 bkg
Receive: set cal co2 bkg ok
cal bkg o2
This command will set O
2
background so the O
2
concentration reads
0.00%. The example below shows a successful auto-calibration of the O
2
background.
Send: set cal bkg o2
Receive: set cal bkg o2 ok
Calibration