Terumo BCT Trima Accel, Руководство по обслуживанию

Страница: 39 / 340

Table 1-9: Centrifuge system components (continued)
Component Function
9 Loading port Opening in the centrifuge used to route the disposable tubing set from the loop
arm to the filler.
10 Gear train assembly Consists of the centrifuge gear assembly and the rotating part of the centrifuge.
11 Motor coupler Connects the centrifuge motor to the gear assembly.
12 Centrifuge motor Spins the disposable tubing set channel to separate blood into its components.
13 Power cable Provides 3-phase 64 V DC voltage to the centrifuge motor.
14 Centrifuge Hall-effect
sensor cable Connects three Hall-effect sensors inside the motor to the safety stack in the e-
box. These sensors are used to read the speed of the motor shaft.
15 Precession damper pin Connects the precession damper to the centrifuge assembly.
16 Precession damper Prevents precessional movement of the centrifuge while changing rotation
speed.
17 Ground strap Provides a common ground point between the centrifuge assembly and the
device chassis.
18 Centrifuge motor
controller Provides 3-phase power signals to the centrifuge motor.
19 64 V switch Controls the power available to the centrifuge motor.
Operational Description
1-30 Trima Accel
®
Automated Blood Collection System • Service Manual