Teledyne PATHFINDER Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 240

Teledyne PATHFINDER Скачать руководство пользователя страница 95

Pathfinder DVL Guide

April

2018

EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.

Page 83

Returning Systems to the TRDI Factory

When shipping the system to TRDI from either inside or outside the United States, the following instruc-

tions will help ensure the Pathfinder arrives with the minimum possible delay. Any deviation from these

instructions increases the potential for delay.
Step 1 - Request a Return Material Authorization
To obtain a Return Material Authorization (RMA) number and shipping instructions for the return of the

instrument, do one of the following:

•

Contact Customer Service Administration at

[email protected]

•

Call +1 (858) 842-2600

When requesting a RMA number, please give us the following information:

•

What is being shipped (include the serial number)

•

When you plan to send the shipment

•

What issue(s) need to be corrected

•

Name of the Field Service Engineer that knows about the issue

•

When you need the instrument returned

TRDI’s Customer Service will then respond with the RMA number for the shipment. Please include this

number on all packages and correspondence.
Step 2 – Provide a MSDS as necessary
Please provide a Material Safety Data Sheet (MSDS) if the system/transducer is painted with antifouling

paint.
Step 3 - Ship via air freight, prepaid
Urgent Shipments should be shipped direct to TRDI via overnight or priority air services. Do not send ur-

gent airfreight as part of a consolidated shipment. Consolidated shipping will cost less, but may lose up to

three days in transit time.
Non-urgent shipments may be shipped as part of a consolidated cargo shipment to save money. In addi-

tion, some truck lines may offer equivalent delivery service at a lower cost, depending on the distance to

San Diego.
Mark the Package(s)
To:

Teledyne RD Instruments, Inc. (RMA Number)

14020 Stowe Drive

Poway, California 92064

Airport of Destination = San Diego

Notify Paxton, Shreve and Hayes

Phone: +1 (619) 232-8941

Fax: +1 (619) 232-8976

«
...
93
94
95
96
97
...
»

Содержание PATHFINDER

















































































































































































































































Отзывы:

Нет отзывов